Thursday, June 5, 2008

Grooming your German Wirehair Pointer

Grooming the GWP
One of the most common questions I receive concerns the grooming needs of a Wirehair. It can be a daunting task, or at least feel like it, but in reality, keeping your GWP looking good shouldn't be that difficult. There are some tricks and tips, some tools, and timing issues that make it all so much easier.

Every Wirehair needs a couple of things done on a regular basis to keep them in good shape.
  • Clean their ears- get some cotton swabs and wipe down the inside of the ear leather and check the ear canal to make sure they are clean. Any brown debris, redness or foul smell are signs of problems. If you notice your dog shaking his head, or scratching his ears you may have an infection starting. Probably time for a vet visit.
  • Clip or grind their nails- Wires have very strong nails, never allow them to get too long. Start them as young puppies and get them used to having their feet handled and nails trimmed. I find trimming much easier if I use a dremel grinder. This is quick, and easier than clippers. Just be careful not to grind too short, or keep the grinder on the nail for too long. Heat can build up and this will make your dog hate having his nails done.
  • Check between their pads for foreign objects- I've found some truly interesting things in between the toes of my guys. Seeds, weeds, grass, stickers and gum. An embedded foreign object can cause major problems, so check often.
  • Bathing- Most Wirehairs rarely need a full bath. The harshness of their coats tend to shed dirt rather easily. Most times even the muddiest dog will come fairly clean if you will let them dry and then give them a good brushing. For the really dirty, stinky dog (and face it, most Wirehairs can find the most disgusting things to roll in!) when you decide to bathe them, use a shampoo made for Wire coated breeds. It does make difference to the texture of the coat after a bath. Make sure you rinse well!!!

Help! My German Wirehairs hair is out of control!
All Wirehaired coats need to be removed from time to time, this is what we call "Stripping" or removing the dead coat so new coat can grow in. The old, dead coat is "stripped", or pulled from the body, making room for a new hair to grow back in.
Different coat types (shorter, longer, softer or harsher) will require stripping at different times and this will depend on several factors. Most GWP's will need a good stripping in the spring and again in the fall. This is the time of the year when they will lose their winter coats (or summer coats) and get ready for the new season. If you don't keep up with their coats throughout the year (which by the way is the easiest way to do it) you will need to get to work before they become a shaggy mess.


Photo above shows a blown coat, ready to for stripping.

You may notice your dog is becoming very shaggy looking, their hair will look "clumpy" and they will feel and look dirty. No matter how much you brush them, they still look very unkept. This is a good sign that they are in need of a good stripping. Or, you may notice your dogs lovely dark liver hairs are turning blonde or red, a sure sign that thier coat is on it's way out.

So, go get your grooming table, your tools and let's get at em!

Puppies, darn it aren't they cute!
All puppies come with puppy coats! In our breed that coat should feel harsh when they are very young, but it's still a puppy coat. This coat will begin to change when they are around 5-6 months old when they will begin to shed out that puppy hair and their adult coat will begin to come in. Most young Wires will have fairly harsh coats right down the middle of their backs and at the base of their tails and this will begin to spread over the rest of their bodies as they mature. If you begin to remove the puppy fuzzies as soon as he gets to his new home, you will be one step ahead of the grooming game.


Start this grooming process after they have had a good romp and are tired. If you can get them to lie quietly on your lap or on a grooming table, life will be much more pleasant for you both. Once you have the puppy quiet and relaxed, stretch his skin with one hand, rub backwards against his coat and look for long hairs or soft fluffy hairs standing up and away from the body. Grasp just a bit of this hair and pull it gently toward you. Just work all over the puppy pulling a bit here and there, don't get crazy at first, we just want him to get used to being worked on. If you will be diligent about this grooming on a weekly basis your puppy will not only look good, but will get used to having you touching him all over and will come to enjoy the attention.

When working around the head and mouth at this age, work gently and slowly. At this age puppies begin to lose their puppy teeth and their gums will be sore. Remember, we don't want to cause any discomfort, we want this to be enjoyable.


Advanced Coat Care (Or how to become a Stripper!)
Stripping isn't a difficult task to learn, but it does take some patience and does take some time. What exactly is stripping a coat? Let's talk just a bit about what makes a wire coat in the first place.

This breed has what we call a double coat. Close to their body they have a soft undercoat which insulates the skin from both heat and cold. Some have very thick, very fluffy undercoats and this must be removed so the outer coat can lie flat. We use a special tool for this, an undercoat knife. One brand is made by Hauptner and this works well. Just rake through the coat and the dead undercoat will come out. Be careful not to rake to roughly as you can cut the dog if you are not careful.

The outer coat consists of strong, straight, stiff hairs which are longer (or should be) than the short, soft undercoat. Wire coats don't shed like a Lab, Shepard or even a Pointer. The coarse outer hair will grow to it's genetic length and then simply die. Dead as a doornail it will be, and it won't fall out. It just stays there until it is removed. There are several ways for that dead hair to get removed- it can be pulled out when the dog is running through the field, or with a tool (knife,comb or brush) or it can be removed by stripping.

The Easy Coat
A dog with a truly great coat will need little in the way of grooming. This coat is naturally hard, stiff and flat lying. Generally the head and ears are covered with short, but harsh hairs. A good stiff bristle brush, a medium tooth steel comb and your fingers are all you will need to keep this dog looking neat and clean. This type of coat will probably shed more than a longer coat, but the upkeep is pretty easy. Give this dog a good brushing, comb thru the eyebrows and beard once a week or so, and presto....all done. Now and then, brush the coat against the grain and grasp the long hairs at their tips with your fingers, they should come out very easily. Always pull the hairs in the direction they grow!

The Longer Coat
If your GWP has a longer coat, but still good and harsh, you will need to learn the art of hand stripping. NEVER clip your GWP!! Doing so will turn a decent harsh coat into a soft matted mess in no time flat. Clipping a wire coat might seem the easy path now, but in the long run, you will regret your decision. The clippered coat will collect dirt, burrs and will mat and tangle very easily. A clippered coat will lose the texture and density needed to protect your dog from briars, and cold water. And once clipped, it can take years to get it back to it's harsh dense state. Take the time to learn how to strip your German Wirehair, it will be worth the effort.

To begin the stripping process, give them a good brushing all over, follow this with a through combing all over their body, head, legs, ear and beards. Now, brush the hair backwards with your comb or with your fingers. See those long hairs standing up? Grasp a couple between your fingers (by the tips only) and pull them out. Pull in the direction they grow naturally and they should come out very easily. It usually helps if you pull their skin in front of the section you are working on taut so you are pulling the hair, not their skin. Keep pulling those sticking up hairs all over their body. Keep moving and don't concentrate on only one section to begin with. And don't fret if you get a bit over zealous and pull out too much in one spot. It will grow back! It always grows back!!

How to find missing objects in your Wires beards!
Those who own Wirehairs know that those beards can hide not only a ton of toilet water, but last nights dinner as well. Keeping the beard free of soft dead coat helps solve some of that! Beards should be of strong stiffer hairs, not full of fluff.
Comb the beard and eyebrow foward and use your fingers to fluff up the coat. See all of those soft long hairs? They may even be blonde or red, not a pretty dark liver. Grasp those hairs, just a bit at a time, and pull them out. Use your fingertip and be gentle about it.

Make an imaginary line running from the outside corner of the eye to the corner of the mouth and pull any long hair behind that line on their cheeks. Then make another line from corner to corner of the mouth and pull down the underjaw and throat. The throat area is always the most difficult area for me to get at. Just work on it bit by bit, hair by hair and in no time the job will be complete.

For eyebrows, you want the outside corner shorter than the inside corner, so pull those hairs a bit more.

Tails, Butts, and Privates
Many dogs don't care for their tails being worked on, but unfortunately it's something we have to do. Most Wires, even ones with poor, soft coats, will have harsher hair on their tails. Don't know why, but it's true! Anyway, you should keep the hair on the tail in neat condition, just like their bodies. And never leave a flag of hair under the tail. It just looks messy and downright silly. If need be, this is one area where you can use scissors to neaten up the coat. But try to pull it from time to time.

Around the butt is another place that is very sensitive and most dogs don't care to have messed with. I normally try to pull as much as I can here, but will use thinning shears to make the job easier on both dog and me. Be careful here, sharp scissors can make a hole in dog pretty quickly.

Male dogs sometimes carry a lot of hair around their penis, and this area can be clipped with a #10 blade. This will keep it cleaner and keep those nasty little dreadlocks from forming. Much more sanitary, and just makes an all around nicer picture in ones mind.

Finally, trim the hair around the outside of the paw if needed, and trim long hair in between the pads. This will help keep your kitchen floor cleaner!

Once you get the hang of it the entire stripping process will become second nature to you. Just take your time, step back every now and then, run the brush over the entire coat and look for areas you have missed. Again, don't panic if you make a bald spot. It may look bad, but within a week or so, you will see that new coat beginning to grow in.

Tools
Along with a good bristle brush and metal comb you may wish to purchase a couple of other grooming tools.
Furminator - This is essentially a very tight clipper blade on a handle that helps remove dead undercoat and some outer coat. Some of my dogs need nothing more, others it does a great job on the undercoat, but won't pull much outer coat. But it's a tool I will always have in my grooming bag. It also does a great jobof finding fleas and removing ticks. Expensive, but worth it.

Stripping Knives- There are dozens of stripping knives on the market, each to remove coat on different areas of a dogs body. A knife will save your fingers and helps cut the stripping time. Most knives come coarse, medium and fine- each takes a differing amount of coat with each pull. I use a coarse knife for the first overall stripping, medium for more detailed areas, and a fine knife for the head, ears and throat.





The biggest thing to remember when using a stripping tool is to pull the hair, not cut it! When you grasp the hair between your finger and the blade, pull straight back, do not break your wrist. If you do, you will cut, not pull.

Bot Blocks- A bot block is a piece of volcanic rock that is very coarse and is marketed to horse owners to remove bot fly eggs from the coat of horses. It is very coarse and can be used on a wire coat to remove dead out coat. Just bust off a piece to fit your hand and run it over the top coat. If you use this every few weeks you will keep that dead coat down to a dull roar. A pumice stone will also do the same job, but usually it's not as coarse. Either product will work.

This all sounds like a lot of work!
True, coated breeds all need care of some sort. And Wire coats sometimes need even more! If you learn how to care for your dogs coat and begin when they are puppies, it all becomes a lot less work. Also, if you will groom them weekly, or every other week, you will keep them in coat and cut your grooming time down considerably. Wait till their coat is totally blown (dead all over their body) and you have a great task in front of you.

One last piece of advice. Invest in a good sturdy grooming table, or set up a workbench where you can tether your pooch. Keeping him up at your level, and off the floor, not only saves your back, but also give you the advantage of keeping him still. Dogs aren't comfortable up in the air, off the floor, so they tend to stand still more easily. But never ever leave your dog alone on the table. He could fall, and drag the table with him. Not a good way to gain confidence. Have fun!

Grooming time is also a wonderful time to check your Wirehair for bumps, cuts, or any other unusual things you may find. Enjoy this personal time with your dog, it's well worth the effort.

22 comments:

Anonymous said...

This is a good article. I have considered a GWP,but, frankly,having always owned smooth-coated breeds,the coat care seemed a bit intimidating to me. This clarifies things and partially assuages my concerns.

Thanks.

Anonymous said...

Love love love this post! I send this link to anyone with GWP grooming questions. Thanks!

Dog Groomer said...

Learn the how to's with proper dog care and what you can do to insure your dogs health. Discover why dog grooming is important and what you can do today for long term doggy happiness tomorrow.

Dog Groomer

Toronto Dog Groomer said...

Dog grooming is important for the health and appearance of your dog. The amount of time you spend grooming your dog will depend on the breed - and how inclined he is to get muddy! Follow the tips and advice for grooming and bathing your dog.

Toronto Dog Groomer

Unknown said...

Just like humans, cleanliness is a must! Since dogs are considered part of the family, or can be a baby, a dog owner is responsible to keep the cleanliness and good health of his dog. Of course, bathing a dog is not that easy! However, you can lessen the hassles by getting a booster bath

Anonymous said...

Fab article gives concise and detail info all in one very clear - now I have to set to work!!!

Unknown said...

This one is really cute actually. I believe as the dogs are most adorable and lovely pets and the most important thing loyal to the owners. They simply own you with their cuteness and love. If you are having pets then you must try the Pet Grooming Tips to groom your pets well without any worries so that you can also show your love and affection towards them without annoying them.

Anonymous said...

Can anyone tell me why our GWH smells musty? We know his coat holds water so we towel dry him as best we can after he's been in the water but it doesn't seem to matter. We bathed him about a week ago & now smells bad enough to be bathed again, which we know can't be good for his skin. My husband grooms him religiously & his coat appears shiny & healthy looking. But there must be something we're missing!

Blogger said...

Did you know that you can make dollars by locking special pages of your blog or site?
Simply open an account on AdscendMedia and use their Content Locking tool.

ayon saha said...
This comment has been removed by the author.
Anonymous said...

Hello, thank you for sharing this. Of course, grooming is important when you have pets in the house. Our neighbor has lots of dogs in their yard but he never maintains it clean. That's why most of their pets got sick and some other pet died from diabetes and cancer. I recommend to her the pet cremation in tampa for arrangement of her pet.

Waseem said...

On a funny note, I would like to share this post on dogs with funny haircuts. They are just hilarious - Funny Dog Haircuts

KHarriage said...

Do you have any suggestions for getting a beard to grow in better?

Paul - A Dog Owner said...

When dog is barking in uncontrolled manner, I use the dog whistle app for my needs

Anonymous said...

Awesome blog. I enjoyed reading your articles. This is truly a great read for me. I have bookmarked it and I am looking forward to reading new articles. Keep up the good work! grooming tools

Private tutor Lighthouse said...

It was a beneficial workout for me to go through your webpage. Dog gooming lake worth It definitely stretches the limits with the mind when you go through very good info and make an effort to interpret it properly. I am going to glance up this web site usually on my PC. Thanks for sharing

Nawazz said...

Kya apne Is App ko Avi tak try nhi kia Rhonna Designs Apk

Tina said...

I appreciate this feed! We have a GWP, after reading this we will not have her clipped. The biggest trouble we have with her is when we hunt her she gets so many burrs and, when in water her hair balls up on the tummy. It is so true on her fur hiding things. When we had her groomed she was cut with clippers and they did not tell us. I am furious!
I will definitely try to accomplish this.

Tina

yorkie puppies for sale craigslist said...


All kittens adopted from royaltykitten.com Sphynx Cattery come with current vaccinations, dewormings, written sales contract, Two year health guarantee, health record, Spayed or Neutered, 30 days of free pet insurance for your kitten,
sphynx cats for sale, sphynx kittens for sale, hairless kitten for sale, hairless cats for sale, and a kitten care package which includes food, litter and several surprises for you and your kitten. sphynx cat for sale near me, sphynx kitten for sale, hairless cats for sale near me, hairless kitten for sale, hairless cats for sale Kittens are Generally ready to leave between 10 to 11 weeks old.
Sphynx do not develop as quickly as cats with hair.

fgtk said...

The breed became very popular in the early 1900s, and in 1913 and 1914, https://oneshoppharmacy.com they were among the 10 most popular entries in the Westminster Kennel Club Show. During World War I, however, the breed fell on hard times in the U.S. and England because they were poodle for sale closely associated with Germany. Dachshund owners sometimes were called traitors and their dogs stoned. After
World War I, some U.S. breeders dachshunds for sale imported some Dachshunds from Germany and the breed started to become popular once again. The breed faced a similar fate during World War II, but not nearly so severely as during World War I.
In the 1950s, Dachshunds became one of the most popular family dogs in the U.S. again, a status they have enjoyed ever
since. While Dachshunds mini dachshund puppy for sale rarely are used as hunting dogs in the U.S. or Great Britain, in other parts of Europe, especially France, they still are considered hunting dogs. mini dachshund puppies for sale Dachshunds also love a challenge, and as long as you incorporate plenty of opportunities to chase and find things, you’ll miniature dachshund for sale have a happy dog.These dogs love their human parents, and really don’t want them to leave.

Jhon Carter said...

This content is really well-researched and the words are excellent. I was so absorbed in this material that I couldn't stop reading. Your work and expertise are impressive. Thank you, especially in the context of grooming courses online .

FAQ pet grooming said...

Thanks for sharing this amazing informative post with us i found this helpful for, answers to all the questions you've ever thought of asking about Pet Grooming. To get more information, visit our website now!